Wireless Stick is a perfect enterprise-class IoT platform. It integrates WiFi, LoRa, and Bluetooth network development boards to connect any of your IoT devices easily and quickly.

The main control chip is a 32-bit dual-core ESP32 chip, which integrates WiFi and Bluetooth functions. The main processor can run the user application completely freely, with an additional ULP coprocessor, which can monitor GPIOs, ADC channels and control most of them. Internal peripheral

The product is small in appearance, has powerful computing functions, supports Arduino, rich interface and other product features, users can program the product through standard library and simple development language, and quickly complete solution verification and product development.

 

Product Parameters

Power Supply

  • Input power: USB, lithium battery
  • Output power: +5V (only when USB is powered), +3.3V
  • Integrated lithium battery charging circuit
  • External power supply controlled by IO port, convenient for development board to enter low power consumption

Power Consumption

  • Deep sleep state: 800uA
  • WiFi scan: 115mA
  • WiFiAP: 135mA
  • LoRa10dB transmission: 50mA LoRa12dB transmission: 65mA LoRa15dB transmission: 110mA LoRa20dB transmission: 130mA

Human Interaction

  • Onboard 0.49 inch 64*32 resolution OLED display;
  • Reset and program are included on the board for easy debugging and development;

Interface

  • UART, SPI, I2C, I2S, Mirco SD card
  • 12 – bits ADC8 – bits DAC
  • 29 general purpose GPIO ports

Mechanical Structure

  • Size: 60mmX23mmX8mm

Storage

  •  FLASH:64M-BitsMB

Transmission distance & WiFi rate

The open area transmission distance can reach 6km;

WiFi speed 150Mbps;

Exclusive throughout the network

Provide Arduino version of ESP32 + LoRaWAN protocol routine (GitHub resources, need serial number activation, only the development board produced by our company is available, the serial number can be queried on our official website)

CE certification is in progress and CE certificates will be provided later;

Development environment installation

We have posted the latest development environment installation method at this address: http://www.heltec.cn/wifi_kit_install/

The following driversCP210X version driver installation method:

For Mac OS, Ubuntu, Windows 7 and above, the driver is automatically installed. If it is not installed automatically or an error is indicated, please download and install the latest driver from the Silicon Labs website:CP210X version driver download address

(After many tests, we found that the driver of the CP210x series chip version 6.7.0.0 is the most stable. This version is highly recommended:download link

Take the Windows operating system as an example. If the driver is installed normally, you can see similar information in Device Manager – Port:

Surrounding Products

Introduction to Wireless Protocol

This product comes with a shield case, WIFI and BLE antennas are high quality 3D metal stamped antennas imported from Sweden, and LoRa antennas are IPEX interfaces (also called U.FL interfaces);

  •  802.11 b/g/n/e/i
  •  802.11 n(2.4GHz),Speed up to 150Mbps
  •  802.11 e:QoS mechanism to achieve wireless multimedia technology
  •  WMM-PS, UAPSD
  • MPDU and A-MSDU frame aggregation technology
  • Block reply, fragmentation and reorganization
  • Beacon automatic monitoring / scanning
  • 802.11 i security features: pre-authentication and TSN
  • Support WPA / WPA2 / WPA2-Enterprise / WPS encryption
  • Infrastructure BSS Station Mode / SoftAP Mode
  • Wi-Fi Direct (P2P), P2P discovery, P2P GO mode and P2P power management
  • Support for IPv6
  • Bluetooth v4.2 full standard, including traditional Bluetooth (BR / EDR) and low-power Bluetooth (BLE)
  • Supports standard Class-1, Class-2 and Class-3 without external power amplifier
  • Enhanced precision power control
  • Output power up to +10 dBm
  • NZIF receiver with BLE reception sensitivity of -128 dBm
  • Adaptive Frequency Hopping (AFH)
  • Standard HCI based on SDIO / SPI / UART interface
  • High Speed UART HCI up to 4 Mbps
  • Support BT 4.2 controller and host protocol stack
  • CVSD and SBC audio codec algorithms

Using Semtech’s SX1276 chip

  • For different regions, LoRa’s working frequency provides the following options (for reference only, subject to national legal regulations):
    • –  433MHz: Europe, maximum 10dB output
    • –  470 ~ 510MHz: China, the largest 20dB output
    • – 868MHz: Europe, maximum 14dB output
    • –  915MHz: North America, South America, Australia and New Zealand, up to 20dB output
  • Support 433MHz, 470 MHz, 868MHz, 915MHz quad-band optional
  • Can be used as both a LoRa node and a micro gateway
  • Support LoRaWAN protocol
  • Node transmission distance: up to 6KM in open space
  • Output power: up to +20dBm (±2dBm)

Wireless Stick Performance Test

The Product Display