+86 028 6237 4838
You are here:
Wifi Kit 8
$7.59
What's this?
WiFi Kit 8 is a classic IoT dev-board designed & produced by Heltec Automation(TM), it’s a highly integrated product based on ESP8266 (Wi-Fi), Li-Po battery management system, 0.91″ OLED is also included. It’s the best choice for smart cities, smart farms, smart homes, and IoT makers.
Out of stock
Description
Add an Accessories
Characteristics
No Reviews
Description
Summary
WiFi Kit 8 is a classic IoT dev-board designed & produced by Heltec Automation(TM), it’s a highly integrated product based on ESP8266 (Wi-Fi), Li-Po battery management system, 0.91″ OLED is also included. It’s the best choice for smart cities, smart farms, smart homes, and IoT makers.
Main Features
- Microprocessor: ESP8266 ;
- Micro USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures;
- Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching);
- Onboard 2.4GHz (for Wi-Fi) PCB antenna;
- Onboard 0.91-inch 128*32 dot matrix OLED display, which can be used to display debugging information, battery power and other information;
- Integrated CP2104 USB to serial port chip, convenient for program downloading, debugging information printing;
- Compatible with the Arduino development environment.
Specifications
| Parameters | Description | Master Chip | ESP8266 (160MHz Tensilica L06) |
|---|---|
| USB to Serial Chip | CP2104 |
| WiFi | 802.11 n support (2.4 GHz), up to 72.2 Mbps |
| Display Size | 0.91-inch OLED |
| Hardware Resource | UART x 2; SPI x 2; I2C x 1; I2S x 1; 10-bits ADC inputx 1; GPIO x 17 |
| Memory | 4MB(32M-bits) SPI FLASH; 520KB internal SRAM |
| Interface | Micro USB x 1; 12 x 2.54 pin x 2 |
| Battery | 3.7VLithium(SH1.25 x 2 socket) |
| Operating temperature | -20~70℃ |
| Dimensions | 50.9 x 18.2 x 8 mm |
Description
Pin Map
High light
FAQ
All HRI-485X series can upgrade firmware via OTA.
No, the WiFi function only used for OTA upgrade.
Docs & Resource
- [Resource] — Pin Map
- [Resource] —Downloadable Resource
- [Resource] —Schematic diagram
Packing list
The default packing list without selecting any accessories is as follows:
| Item | Quantity |
|---|---|
| Wifi Kit 8 | x1 |
| Glue Rod Antenna | x1 |
| SH1.25 x 2 battery connecter | x1 |
Contact
Add an Accessories
Recommend accessories for Wifi Kit 8
Related products
-
CubeCell AM02 Module Plus $11.80 – $11.90 -
Wireless Stick Lite(V3) $14.90 -
HT-M02 Edge LoRa Gateway (V2) $229.00 – $299.00
Characteristics
| Weight | 15 g |
|---|---|
| Dimensions | 5 × 3 × 1 cm |
Reviews
There are no reviews yet.